Panasonic WJ-NT104 1 !2 !3, Password, VIDEO-INPUT Number and MONITOR-OUT CHAN- NEL Setup

●Setup

In the SERIAL PORT SETUP window, set TYPE under RS-232C SETUP or RS-485 SETUP to "WJ-SX550A". Set the same communication parameters as for the Matrix Switcher. (For further details refer to the operation manual of the WJ-SX550A Matrix Switcher.) Click the link to [MATRIX SW CONFIGURATION page] at the bottom of the SERIAL PORT SETUP win- dow to open the MATRIX SWITCHER CONFIGURATION window.

q

w

qPASSWORD

Enter the same 5-digit password as set for the Matrix Switcher.

wVIDEO-INPUT NUMBER AND MONITOR-OUT CHAN- NEL SETUP

Set a channel number for the monitor output of the WJ-

WJ-SX550A Matrix Switcher to be connected to the video input connector on the WJ-NT104 network inter- face unit. The status when selecting VIDEO-INPUT (at WJ-NT104) in the above table is the same as when a monitor compatible with the WJ-SX550A is selected.

●Control Operation

On the Location bar, type the URL http://192.168.0.10/sxindex.html to access the WJ-SX550 OPERATION VIEW window for the Matrix Switcher.

q w

e

r

!4

!5

y u i

o

t !0 !1 !2 !3

62