Panasonic WJ-NT104 Setup Control Operation, Tyu 0!5!1!6!2!7!3!8, Alarm REC Standby, Index

●Setup

In the SERIAL PORT SETUP window, set TYPE under RS-232C to "WJ-DR200". Set the same communication parameters as for the WJ-DR200 AV Disk Recorder. (For further details refer to the operation manual of the WJ-DR200 AV Disk Recorder.)

●Control Operation

On the Location bar, type the URL http://192.168.0.10/drindex.html to access the WJ-DR200 OPERATION VIEW window for the AV Disk Recorder.

!9

q

w

e r

tyu

i

o !4!0!5!1!6!2!7!3!8

qALARM REC STANDBY

To toggle between enabling and disabling alarm recording on the WJ-DR200 AV Disk Recorder.

wINDEX

To search the disk for recorded frames. Clicking the [INDEX] button opens the WJ-DR200 RECORD LIST window. Click the [REFRESH] button in the window to refresh the recording list displayed in the image win- dow. Then click the recording number to play back the selected frames. To exit from search mode, click the [STOP] button.

This button also toggles between displaying recordings as a list and as a group of thumbnails.

You can also use this window to search the disk by the same operation as from the WJ-DR200.

Refer to the operation manual of the WJ-DR200 for details.

65