Panasonic WJ-NT104 Setup Procedures, How to Read Administrator Setup, T y u i o !0, 0CAMERA Menu

SETUP PROCEDURES

■How to Read ADMINISTRATOR SETUP PAGE

On the Location bar, type http://192.168.0.10/hwsetup.html to display the ADMINISTRATOR SETUP PAGE. To open the ADMINISTRATOR SETUP PAGE, you need to enter your user ID and password. The default ID and password are [admin] and [nil (none)], respectively.

q w

e r t y u i o !0

!1

[SET][SUBMIT] button

Clicking this button stores the settings made on the ADMINISTRATOR SETUP PAGE in the WJ- NT104.

The setting range of this button is indicated by the ruled line that separates one item from another. The area showing the data within the range returns to the original display when the button is clicked. The system is not restarted when this button is pressed.

[SET & REBOOT] button

Clicking this button stores the settings made on this page in the WJ-NT104. Remember, however, that any recorded alarm data will be deleted.

qMODE SETUP

To set the default page when a file name is specified. Also set operation mode, image quality, and camera control selection on this page.

wNETWORK

To select LAN/PPP and set the IP address, network, and default gateway.

eALARM

To set alarm input ON/OFF, alarm image save mode, image overwrite YES/NO, number of images recorded, frame rate, and parallel I/O port (See page 37).

rSERIAL PORT

To select RS-232C or RS-485 and set the communica- tion parameters.

tMODEM

To set the modem or TA to be used in the PPP connec- tion.

yUSER

User authorization, user registration, user deletion. To register or delete a user table.

uHOST

To set the address of the host that can be accessed without user certification.

iFTP CLIENT

To set the FTP client.

oDATE/TIME

To set the internal clock of the device.

!0CAMERA MENU

To set connected cameras (option) by remote control.

!1RETURN TO MAIN PAGE

To return to the MAIN PAGE window.

40