Panasonic operating instructions WJ-NT104 Setup, IP Address Setting via LAN Connection

■WJ-NT104 Setup

First, it is necessary to set an IP address for the WJ-NT104 according to the operating environment. Consult your network administrator for the address to set.

●IP Address Setting via LAN Connection

qOn the Location bar, enter http://192.168.0.10/hwset- up.html to display the ADMINISTRATOR SETUP PAGE.

To open the ADMINISTRATOR SETUP PAGE, you need to enter your user ID and password. The default ID and password are [admin] and [nil], respectively.

Click the [NETWORK] button to display the NETWORK SETUP dialog box.

wSet IP-ADDRESS, NETMASK, DEFAULT GATEWAY. Consult your network administrator for the correct set- tings.

eSpecify the TCP/IP settings for the PC.

If the PC is already operating on a network, specify its original IP address in the TCP/IP Properties dialog box (before changing it to 192.168.0.9).

If the PC is running Windows95 or Windows98, select Control Panel / Network / Configuration, click the [Properties] button to open the TCP/ IP Properties dialog box, and enter the IP address. Refer to the set- tings on page 13.

rRestart the PC.

tStart the PC’s browser.

Specify http://(IP address set in the WJ-NT104)/ in the Location bar. The connection is established when the image from the WJ-NT104 is displayed on the PC screen.

Note: Refer page 14 for further details.

●IP Address Setting via RS-232C Connection

For further information, refer to page 54.

15