43
■NETWORK SETUP
On the ADMINISTRATOR SETUP PAGE click the NETWORK button to display the NETWORK SETUPwindow.
Select LAN/PPP, and set IP address, netmask, and default gateway.
qIP ADDRESS (LAN)
Enter the IP address to be used with LAN.
The factory default setting is 192.168.0.10.
wNETMASK (LAN)
Enter the netmask to be used with LAN.
The factory default setting is 255.255.255.0.
eDEFAULT GATEWAY (LAN)
Enter the default gateway to be used with LAN.
The factory default setting is 192.168.0.1.
rIP ADDRESS (PPP)
Enter the IP address to be used with PPP.
The factory default setting is 192.168.1.10.
tNETMASK (PPP)
Enter the netmask to be used with PPP.
The factory default setting is 255.255.255.0.
yDEFAULT GATEWAY (PPP)
Enter the default gateway to be used with PPP.
The factory default setting is 192.168.1.1.
uREMOTE IP ADDRESS
Used when PPP mode is on P to P ACCESS.
Enter the IP address of the PC which calls and access-
es the WJ-NT104. The PC's IP address must be set to
Obtain an IP automatically. The factory default setting
is 192. 168. 1.11.
iPPP MODE
•P to P ACCESS mode
To use this mode, match the IP address of the PC
with the address of the WJ-NT104.
•NETWORK ACCESS mode
To use this mode, match the address of the WJ-
NT104 with the address of the PC. (Independent of
outgoing and incoming calls)
The factory default setting is P to P ACCESS.
oHOSTNAME
Enter the host name.
Alarm notice (e-mail) is sent in the host name specified
here. The host name you enter may be different from
that entered for the domain settings (DNS).
The factory default setting is WJ-NT104.
!0 NETWORK TYPE
Select LAN or PPP.
If PPP is marked, access via LAN is not possible.
q
w
e
r
t
y
u
i
o
!0