Panasonic WJ-NT104 operating instructions Multi input selection mode, 5!6!7 @8 @7 @6

• Multi input selection mode

Enables control of cameras connected to the VIDEO IN connector of the WJ-NT104.

For VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark MULTI INPUT SELECTION MODE.

This mode switches periodically between multiple channels at high speed so that transmission to two or more users requesting different channel is possible.

(1)Connect CAMERA 2 and 3 to the VIDEO IN 2 and 3 connectors on the rear of the WJ-NT104.

(2)Connect the VIDEO OUT 2 and 3 connectors on the rear of the WJ-NT104 to the VIDEO IN 2 and 3 connector of the disk recorder.

(3)Connect MULTISCREEN OUT of the disk recorder to the VIDEO IN 1 connector of the WJ-NT104

(4)Connect the RS-232C ports (of the disk recorder and the WJ-NT104) with a RS-232C cable.

CAMERA 2

WJ-NT104

CAMERA 3	OPERATE
	LINK RCV XMT

Network Interface Unit WJ-NT104

	WJ-HD500			(MULTISCREEN OUT)
				FS 16
1	2	3	4
5	6	7	8
9	10	11	12
13	14	15	16	Digital Disk
				Recorder
				WJ-HD

CAM2

CAM3

HD500

PC

PC

PC

●Setup

In the SERIAL PORT SETUP window, set TYPE under RS-232C to “Serial through”. Set the same communication parame- ters as for the WJ-HD500 disk recorder.

●Control Operation

Type the URL http://192.168.0.10/hd5index.html to access the WJ-HD500 CONTROL window for the disk recorder.

q

w

e r

t y

u i

o

!0

!1 !2

!3 !4!5!6!7

!8

!9

@0

@1

@2

@3

@4

@5

@8 @7 @6

70