INSTALLATIONS

The installation described below should be made by qualified service personal or system installers.

Mounting in a Rack

The WJ-NT104 can be mounted in a rack using the optional WV-Q204/1 mounting brackets.

Use of the optional WV-Q204/2 mounting brackets permits mounting up to two WJ-NT104 units in a rack side by side.

1. Remove the four rubber feet by removing the four screws from the bottom of the WJ-NT104.

Rubber feet

Mounting one WJ-NT104 with the WV-Q204/1

2.Fix the mounting brackets (large and small) on both sides of the WJ-NT104 with the eight supplied screws (M3x8) as shown below.

Rack mounting bracket (small)

Rack mounting bracket (large)

Mounting two WJ-NT104 with the WV-Q204/2

2.Place the joint metals on the WJ-NT104 units as shown below and fix them with the twelve supplied screws (M3x6) Note: Remove two screws from the rear of the WJ-NT104 beforehand.

Fix the mounting brackets (small) on both sides of the WJ-NT104 units with the eight supplied screws (M3x8) as shown below.

Joint metal

Remove 2 screws from

 

the rear beforehand.

Rack mounting bracket (small)

Rack mounting bracket (small)

8

Page 8
Image 8
Panasonic operating instructions Installations, Mounting in a Rack, Mounting one WJ-NT104 with the WV-Q204/1