CONFIGURING OTHER ADVANCED OPTIONS

Default Async Protocol

TERMINAL MODE

USING CFGEDIT

1.From Options, select Default Async Protocol.

2.Select Action on Data Timeout.

3.Select Use Terminal Mode.

4.Next, select Data Timeout Value. Change value, in seconds, as desired (minimum: 1; maximum: 60).

5.Return to Main Menu and select Security.

6.Select Network Login Information.

7.Select Network Login General Configuration.

8.Select Terminal Server Security:

a.To default to remote analog console access for system management, select Use Administrative Login.

b.To default to user-level authentication before PPP transfer, select the authentication server you plan to use. Your choices are: RADIUS, TACACS and ACE. In addition, you must also configure the remaining security options to support user-level authentication. Refer to Security Overview (and its related chapters) for more information.

c.If you want the default to be no terminal access when time has expired, select Do not allow terminal access.

USING MANAGE MODE

termopt

Allows you to change the default async protocol configuration as if in CFGEDIT screen.

CALL DISCONNECT

USING CFGEDIT

1.From Options, select Default Async Protocol.

2.Select Action on Data Timeout.

3.Select Disconnect.

4.Next, select Data Timeout Value. Change value, in seconds, to the amount of time you want the system to wait before disconnecting (maximum: 60 seconds).

USING MANAGE MODE

termopt

Allows you to change the default async protocol configuration as if in CFGEDIT screen.

DEFAULT ASYNC PROTOCOL CONFIGURATION ELEMENTS

ACTION ON DATA TIMEOUT

Determines the action the CyberSWITCH will take when it receives no data during the autosense mode and time has expired. Configurable values are: Disconnect, Use PPP Protocol, and Use Terminal Mode. The default is Disconnect.

Central Site Remote Access Switch 393

Page 393
Image 393
Enterasys Networks CSX5500, CSX6000, CSX7000 manual Terminal Mode Using Cfgedit, Call Disconnect Using Cfgedit