LG Electronics 32LD343H, 42LD343H, 37LD343H, 26LD343H Learning an FMA Configuration File from a TV

FTG Mode of Operation (Cont.)

Teaching FMA Configuration to a TV / Learning an FMA Configuration File from a TV

Teaching FMA Configuration to a TV

1. Plug the USB memory device that contains the FMA Con guration le into the Target LD310H TV USB IN port.

2.Press MENU to display the TV setup menus, use the arrow navigation keys to select/ highlight either the Option (if TV is in Pass-through Mode) or Lock (if TV is already in FTG Mode) menu icon, and then press the number “7” key a total of seven times to display the USB Download Menu.

3.Use the Up/Down arrow keys to select Teach To TV (FMA), and then press ENTER.

4. Use the Up/Down arrow keys to select the FMA Con guration le you want to install, and then press ENTER.

The TV will show Teaching completion progress in a new window. Do NOT remove the USB device until Teaching is complete. When Teaching is complete, the TV will tune to the rst logical channel in the FTG Channel Map.

5.When Teaching is done, remove the USB memory device. The FMA Configuration should be resident on the Target TV. Also, the Target TV is now in FTG Mode (if it was previously in Pass-through Mode).

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (FMA)

Return Enter

Teach To TV (FMA)

xx0BAL-PLAT200001.FMA

Return Enter

!Teach To TV

UPDATING...

50%

Do not unplug!

Learning an FMA Configuration File from a TV

To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FMA Configuration file using the FTG Configuration Application as described on the previous page. However, if necessary, this option enables you to save (Learn) an FMA Configuration file from an LD310H TV to a USB memory device.

Note: If the LD310H TV is NOT already in FTG Mode, you may need to perform some manual configuration on the TV before you start this procedure (see following page).

1.Plug a USB memory device into the USB IN port on the TV.

2.Press MENU to display the TV setup menus, use the arrow navigation keys to select/ highlight either the Option (if TV is in Pass-through Mode) or Lock (if TV is already in FTG Mode) menu icon, and then press the number “7” key a total of seven times to display the USB Download Menu.

3.To gain access to the Learn From TV options in the USB Download Menu, key in the password used to enter the Installer Menu (Example: Press 9-8-7-6).

4.Use the Up/Down arrow keys to select Learn From TV (FMA), and then press ENTER.

5. To identify the le from others, you can use the Up/Down arrow keys to change the last ve digits of the lename. Press ENTER when you are ready to initiate Learning.

The TV will show Learning completion progress in a new window. Do NOT remove the USB device until Learning is complete. When Learning is complete, the USB Download Menu will reappear on screen.

6. When you are nished, remove the USB memory device.

Note: It is highly recommended that you open this FMA Configuration file in the FTG Configuration Application—BEFORE transferring (Teaching) the file to any TVs—to verify FTG Channel Map and FTG Installer Menu settings and enable Pro:Idiom decryption by marking Encrypted channels. This will also enable you to confirm and add channel attributes, labels, etc.

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (FMA)

Learn From TV (TLL)

Learn From TV (FMA)

Return Enter

Learn From TV (FMA)

Select the		le name and press OK to start
		►
	xx0BAL-PLAT200001.FMA
		►
	Return	Enter

!Learn From TV

UPDATING...

25%

Do not unplug!

206-4177 31