LG Electronics 42LD343H, 37LD343H, 26LD343H, 32LD343H, 32LD333H, 37LD333H owner manual 206-4177

Installer Overview

This is the Commercial Mode Setup Guide only.

Installer Menu / Commercial Mode Setup

To set up a Master TV for cloning purposes, you will need to know how to enter the TV Installer Menu and make changes to the default values as required. Similarly, to configure a TV’s Installer Menu settings in FTG Mode, you will need to know how to access and use the FTG Configuration Application utilities. If necessary, familiarize yourself with the Installer Menu and how to make and save changes. Refer to page 14 for information on accessing the Installer Menu in Pass-through Mode. Pages 15 to 20 describe Installer Menu items in detail. Refer to pages 29 to 36 for information on entering FTG Mode and using the FTG Configuration Application utilities.

Installer Remote

The LG Installer Remote is supplied with and dedicated to operate the TV. See next page for typical key functions in TV operating mode. Some DVD and VCR controls may be available for selected LG DVD/VCR products.

Cloning

Cloning refers to the process of capturing a Master TV Setup and trans- ferring it to a Target TV. The Master TV’s clonable features need to be configured as part of the Commercial Mode Setup. This is a critical step. If the Master TV’s clonable features—channel icons or labels, digital font options, etc.—are not set up correctly, the cloned TVs will all have prob- lems. Pages 23 to 28 provide detailed information on cloning require- ments and procedures.

+

+ AAA AAA

Installing Batteries in Installer

Remote

•Open the battery compartment cover on the back side of the remote.

•Install two high-quality alkaline 1.5V AAA batteries. Never mix old or used batteries with new ones. Install batteries matching correct polarity as shown (+ with + and - with -).

•Replace the battery compartment cover.

xxLD310H PTC INSTALLER MENU

000	INSTALLER SEQ	000
UPN	000-000-000-000	ASIC 20E7
PTC	V1.00.001	CPU V3.25.00

Typical Installer Menu

ALARM TIMER INPUT

		TV
1	2	3
4	5	6
7	8	9
	0	FLASHBK
	INFO i
VOL	PORTAL	CH	P
			G
			A
			E
	MUTE
MENU	GUIDE	CC
	ENTER
RETURN	SAP	EXIT
		EJECT
RATIO

10 206-4177