LG Electronics 37LD343H, 42LD343H, 26LD343H, 32LD343H, 32LD333H, 37LD333H owner manual Back

Installer Remote Control Typical Key Functions

The LG Installer Remote illustrated below and throughout this document shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

POWER Turns TV ON or OFF.

ALARM Sets the time when the TV will automatically turn itself ON.

TIMER Sets the amount of time before the TV automatically turns itself OFF.

INPUT Selects RGB, HDMI/DVI1, HDMI2, Component Input, AV1, and AV2 sources.

TV Returns to the last TV channel (from an Aux input).

VOLUME UP/DOWN Increases/decreases sound level.

INFO Displays channel information.

PORTAL Displays and removes the interactive menu.

MUTE Switches sound ON or OFF.

CHANNEL/PAGE UP/DOWN Changes the channel. Moves from one full set of screen information to the next.

Color buttons access special functions in some menus.

DVD/VCR BUTTONS Controls some DVD players or video cassette recorders.

EJECT Ejects a USB memory device, CD, DVD, VHS tape, as applicable.

206-4186

ALARM TIMER		INPUT				NUMBER Buttons (0 - 9) & DASH
			TV
						Use to enter a program number or channel.
						Dash is used for sub-channel numbers such
1		2	3			as 2-1, 2-2, 9-1, 9-2, 100-3, 100-4, etc.
						FLASHBK (FLASHBACK)
4		5	6			Returns to the previously tuned channel.
						Arrows (Up/Down/Left/Right) & ENTER
7		8	9
						Use to navigate on-screen menus and
						adjust TV settings to your requirements.
		0	FLASHBK			MENU
						Displays the TV setup menus on the screen.
						Also exits the on-screen menu system and
						returns to TV viewing.
	INFO i					GUIDE
			CH	P
VOL	PORTAL					Displays and removes the electronic
				E
				G
				A
	MUTE					program guide.
						CC
MENU	GUIDE		CC			Press to activate subtitles.
						BACK
						Returns one level to the previous menu/
	ENTER					display.
						SAP
						Analog Mode: Selects MTS sound (Mono,
						Stereo, or SAP). DTV Mode: Changes
						audio language, if additional languages are
RETURN		SAP	EXIT			available. *
						EXIT
						Clears all on-screen displays and returns to
						TV viewing.
						RATIO
			EJECT			Adjusts the picture aspect ratio.
RATIO
				*	SAP notes:
					•	If SAP is selected and no SAP is provided, sound
					•	may not be heard on channel.
						Each analog channel may have its own SAP setting.
					•	Digital channels will reset to default audio language
						with a power off/on.

11