LG Electronics 37LD343H Cloning Procedures, USB Cloning Notes, Learn Setup from Master TV

Cloning Procedures

Learning / Teaching a Master TV Setup using a USB Memory Device

USB Cloning Notes

•Read the IMPORTANT CLONING INFORMATION on page 27 before beginning any cloning procedures.

•You may edit a lename as part of the Learning procedure; however, a le with edited contents will not be recognized.

•It is not possible to clone a Master TV’s clock using a USB memory device. Either set a Target TV’s clock manually, or use the Auto Clock setting in the TV setup menus.

Learn Setup from Master TV

1.Ensure the Master TV is set up completely and the EBL is in Pass-through Mode.

2.Plug the USB memory device into the USB IN port on the Master TV.

3.Press MENU to display the TV setup menus.

4.Use the arrow navigation keys to select/highlight the Option menu icon; then, press the number “7” key a total of seven times to display the USB Download Menu.

5.To gain access to the Learn From TV option in the USB Download Menu, key in the password used to enter the Installer Menu (Example: Press 9-8-7-6).

6.Use the Up/Down arrow keys to select Learn From TV and press ENTER.

7.To identify the pro le from others, you can use the Up/Down arrow keys to change the last ve digits of the lename. Press ENTER when you are ready to initiate Learning.

Learning status will be shown on the progress bar. When the Learning process is complete, the USB Download menu will reappear on screen.

8.Remove the USB memory device.

Teach Master TV Setup to Target TV

1. Ensure the Target TV EBL is in Pass-through Mode, and then plug the USB memory device with the Master TV Setup le into the Target TV USB IN port.

2.Press MENU to display the TV setup menus.

3.Use the arrow navigation keys to select/highlight the Option menu icon; then, press the number “7” key a total of seven times to display the USB Download Menu.

4.Use the Up/Down arrow keys to select Teach To TV and press ENTER.

5.Use the Up/Down arrow keys to select/highlight the Master TV Setup you want to install and press ENTER. Note: Filenames identify the TV and the TLL version (see example at right).

Teaching status will be shown on the progress bar. When the Teaching process is complete, the USB Download menu will reappear on screen.

6.When Teaching is done, remove the USB memory device, turn OFF the TV, and unplug the TV power cord for 15 seconds.

7.Reconnect the TV power cord, and turn ON the TV. The Master TV Setup should be resident on the Target TV.

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV

Learn From TV

Previous Enter

Learn From TV

Select the le name and press OK to start

►
xxLD320H-UA00001.TLL
►
Previous	Enter

!Learn From TV

UPDATING...

25%

Do not remove the USB from the port!

Do not unplug!

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV

Learn From TV

Previous Enter

Teach To TV

xxLD320H-UA00001.TLL

Previous Enter

!Teach To TV

UPDATING...

50%

Do not remove the USB from the port!

Do not unplug!

28 206-4163