Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers.
•Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as Oms. Otherwise, change the setting according to the table.
Distance between Of and Dc | Delay Time |
yl | 1.31ru |
100 | Lams |
50 | 10 ms |
200 | 59 Mn |
•Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure , set the mode as Orris.
Otherwise, change the selling according to the [able.
| Delay Time |
?IX) | 5.3ms |
4(Y | 10.0 er, |
rily) | 15.9 W. |
•••• Ideal CENTER SPEAKER placement
/Dc Df
| FM Ls R |
;,,,j • | .r Ideal SURROUND |
| SPEAKER placement |
It is desirable to place all speakers within Ihis circle.
nl: The distance from FRONT SPEAKER
Dc: The distance Iri,m CENTER SPEAKER
Ds: The distance Item SUHHOUNO SPEAKER
•Speaker delay time setting is a professional sound volume adjustment method for audio enthusiast. For home use, refer to "Setting up the Ideal Speaker Positions" below to install speakers in appropriate locations.
32
