Insert Remote Batteries
Open the battery cover on the back of the remote control.
Insert two 1.5V AA batteries.
paying attention to the correct polarities (+ and
Replace the battery cover.
Follow these precautions to avoid leaking or cracking cells:
•Place batteries in the remote control so they match the polarity.(+) to (+)and
•Use the correct type of batieries. Batteries that look similar may differ in voltage.
•Always replace both batteries at the same time.
•Do not expose batteries to heat or flame.
Range of Operation of the
Remote Control
The remote control can be used up to approximately 23 feeV7 meters in a straight
line. It can also be operated at a horizontal
angle of up to 300 from the remote control sensor.
Before Using the DVD Player
0 Your DVD player is capable of playing DVD, VCD, and CD discs
User instructions may vary depending on the type of disc. Read the instructions carefully before use.
0 TV Broadcast System
•This device is designed to work with the NTSC video format.
•To change the TV broadcast system to be output, press the ZOOM button while the power is turned off. The selection will switch between NTSC and PAL each time you press the button.
•For normal playback , the video format a DVD disc is recorded in must coincide with your TV's video format.
0 About the a symbol display
•" 6 " may appear on the TV screen during operation.
This icon means the function explained in this owner ' s manual is not available on that specific DVD video disc.
fRCIf' • When the power is not turned on, press down the STOP ( n ) button on the main unit for over 5 seconds.
The product will be initialized to its optimum state.
• Some operational features such as the Speaker mode, Test tone, Volume, etc. will not
7be displayed on the TV screen.