Troubleshooting
0 Check the following guide for the possible cause of a problem before contacting service.
SymptomCause
No power. | • The power cord is disconnected. |
•Plug the power cord into the wall outlet securely.
The power is on, but | • No disc is inserted. | • Insert a disc . (Check that the DVD or , |
the DVD receiver |
| audio CD indicator in the display |
does not work. |
| window is lit.) |
No picture. | • The TV is not set to receive DVD signal | • Select the appropriate video input mode |
| output. | on the TV so the picture from the DVD |
|
| receiver appears on the TV screen. |
No sound.
The playback
picture is poor.
The DVD receiver does not start playback.
•The video cable is not connected securely.
•The connected TV power is turned off.
•The equipment connected with the audio cable is not set to receive DVD signal output
•The audio cables are not connected securely.
•The power of the equipment connected with the audio cable is turned off.
•The Digital Audio Output is set to the wrong position.
•The disc is dirty.
•No disc is inserted.
•An unplayable disc is inserted.
•The disc is placed upside down.
•The disc is not placed within the guide.
•The disc is dirty.
•The Rating level is set.
• Connect the video cable into the jacks |
securely. |
• Turn on the TV. |
• Select the correct input mode of the |
audio receiver so you can listen to the |
sound from the DVD receiver. |
• Connect the audio cable into the jacks |
securely. |
• Turn on the equipment connected with |
the audio cable. |
• Set the Digital Audio Output to the correct |
position, then turn on the DVD receiver |
agars by pressui9 On/standby(l/U). |
• Clean the disc. |
• Insert a disc. (Check that the DVD, or audio |
CD indicator in the DVD display is lit.)_ |
• Insert a playable disc. (Check the disc |
type, color system and Regional code.) |
• Place the disc with the playback side |
down. |
• Place the disc on the disc tray correctly |
inside the guide. |
• Clean the disc. |
• Cancel the Rating function or change |
the rating level. |
The remote control
does not work
properly.
•The remote control is not pointed at the remote sensor of the DVD receiver.
•The remote control is too far from the DVD receiver.
•There is an obstacle in the path of the remote control and the DVD receiver.
•The batteries in the remote control are exhausted.
• Point the remote control at the remote |
sensor of the DVD receiver. |
• Operate the remote control within about |
23 ft (7 m). |
• Remove the obstacle. |
• Replace the batteries with new ones. |
41
