Disc Language
sumo
$uarmE | F_ 4 |
, I' | FRCY,II |
PARENTAL |
|
PW4WORD | RAI IkN _ |
| PANtr3R |
MAIN MAE J |
|
•Select a language for the disc's Menu, Audio and Subtitle.
•Original : The original language set for the disc is selected.
•Other : To select another language, press number buttons to enter the corresponding
Parental Control
Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are country dependent. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.
1.Select "PARENTAL" on the Setup menu using the UP/DOWN (A / ♦) buttons.
^L.
2.While "PARENTAL" is selected , press ► .
3.Use the UP/DOWN (A / ♦) buttons to select a parental control rating (from 1 to 8) and then press the ENTER button.
0 Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the
4.Input a password and then press the ENTER button.
•The player's password is set to"°7 8 9 0 " by default.
•There are up to 8 rating levels on a disc.
•If LEVEL 6 is selected, a disc which contains rating LEVEL 7 and above cannot be played.
•If you select NEW PASSWORD, the screen changes and enables you to enter the new password.
When the rating level password has been forgotten
While the player is in the stop mode, hold the Stop ( n ) button down on the main unit for
more than 5 seconds. |
|
• "INITIAL" appears on the display and all default settings will return to Factory Preset. | 30 |
• Press the On/Standby (I/O) button. |