Chapter 4 Award BIOS Setup
4-7. POWER MANAGEMENT SETUP
Choose〝POWER MANAGEMENT SETUP〞option on the main menu, a display will be shown on screen as below :
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Power Management |
| [User Define] | Item Help |
MODEM Use IRQ |
| [3] | |
|
| ||
** Reload Global Timer Events ** |
| Menu Level ► | |
[Disabled] |
| ||
Primary IDE 0 |
|
| |
Primary IDE 1 |
| [Disabled] |
|
Secondary IDE 0 |
| [Disabled] |
|
Secondary IDE 1 |
| [Disabled] |
|
FDD, COM, LPT Port |
| [Disabled] |
|
|
|
| |
↑↓→←: Move Enter: Select | |||
F5: Previous Values | F6: | ||
|
|
|
|
Power Management Setup Screen
The “Power Management Setup” allows the user to configure the system to the most effectively save energy while operating in a manner consistent with your own style of computer use.
POWER MANAGEMENT:
This item allows you to select the Power Management mode.
MODEM USE IRQ:
This item enable you to name the interrupt request (IRQ) line assigned to the modem (if any) on your system. Activity of the selected IRQ always awakens the system.
PM EVENTS:
PM events are I/O events whose occurrence can prevent the system from entering a power saving mode or can awaken the system from such a mode. In effect, the system remains alert for anything, which occurs to a device which is configured as Enabled, even when the system is in a power down mode. (1) Primary IDE 0 (2) Primary IDE 1 (3) Secondary IDE 0 (4) Secondary IDE 1 (5) FDD, COM, LPT Port
Page: |
