Pro-Tech EB-471LF M1 Onboard Device, USB Controller, USB Keyboard Support, USB Mouse Support

Chapter 4 Award BIOS Setup

hard drive and your system software both support Ultra DMA/33, select Auto to enable BIOS support.

4.OnChip Secondary PCI IDE Enable the secondary IDE channel.

5.IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.

ONBOARD DEVICE:

The options for these items are found in its sub menu. By pressing the <ENTER> key, you are prompt to enter the sub menu of the detailed options as shown below:

Phoenix – Award CMOS Setup Utility

Onboard Device

USB Controller	[Enabled]	Item Help
USB 2.0 Support	[Enabled]
USB Keyboard Support	[Disabled]
USB Mouse Support	[Disabled]	Menu Level ►
Onboard LAN	[Enabled]
Init Display First	[Onboard]
↑↓→←:Move Enter: Select	+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values	F6:Fail-Safe Defaults F7:Optimized Defaults

Descriptions on each item above are as follows:

1.USB Controller

This should be enabled if your system has a USB installed on the system board and you want to use it. Even when so equipped, if you add a higher performance controller, you will need to disable this feature.

2.USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard.

3.USB Mouse Support

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB Mouse.

4.Init Display First

EB-471LF USER′S MANUAL Page: 4-15