Enterasys Networks CSX7000, CSX5500, CSX6000 manual Resource Configuration Elements

USER’S GUIDE

4.For BRI and PRI resource types: select the proper BRI/PRI switch type for the lines you will be using. The table in the Overview identifies which switch types are available; your carrier will identify which particular switch is used in your area. If you select the NET3 or NET5 international switch, you will be prompted for the region of operation:

1)DEFAULT

2)AFRICA

3)AMERICAS

4)ASIA

5)EUROPEAN

6)PACIFIC-RIM

Region from above [default = 1]:

Select the appropriate region. Based upon the region you select, you will be presented with a list of countries. Select the country of operation from this list. If you cannot find your country on any list, return to the Region Menu and select the default value (1).

For PRI resource types only:

a.Select the correct synchronization type. Select either clock master or clock slave. If unsure, configure as “Slave.”

b.For a PRI_4ESS carrier switch type, select which software load (generic #) the switch is running. Obtain this information from your carrier.

c.For a Teleos Simulator carrier switch type, select the switch type that Teleos is simulating.

5.For the Digital Modem resource type:

a.Select from DM-8, DM-24, and DM-30. Note that DM-24 refers to both the V34+ modem adapter as well as the K56Flex modem adapter. If you specify DM-24, the CyberSWITCH will distinguish between the two.

b.Select the Pulse Code Modulation (PCM) encoding method appropriate for your country. Choices include mu-law and A-law.

6.For encryption resource types:

From the list of resource types, choose DES_RSA. (Refer to the Configuring Encryption chapter.)

USING MANAGE MODE COMMANDS

resource

Displays the current resource configuration.

RESOURCE CONFIGURATION ELEMENTS

RESOURCE TYPE

The type of adapter (resource) that plug into the system. WAN adapters are the physical interface for the attachment of lines (i.e., connections) to your system.

RESOURCE SLOT

The slot number into which the resource is plugged.

SWITCH TYPE

For ISDN resources (BRI and PRI) only. The switch type you wish to configure.

116 CyberSWITCH