Enterasys Networks CSX6000, CSX5500, CSX7000 manual Trace Commands, Tftp PUT

USER’S GUIDE

> TFTP PUT

>IP Address of the Host to receive the file (<RET> to abort)? 19.233.45.33

>Enter the name of the local file to send (including the full path) (<RET> to abort)? \config\config.nei

>Enter the name for the remote file (including the full path) (<RET> for same as local)? <RET>

Enter the mode (BIN [binary] or ASC [ascii]) <RET> for ascii? bin

Sending File... Please wait

File Transfer Complete...

tftp session

Displays the TFTP session information of active TFTP sessions. To get detailed information on a specific session, enter the session’s Id number when prompted. You can not display the session information for a TFTP session that has terminated. The following screen illustrates the use of this command.

> TFTP SESSION
Id Sess-Id Local file			Type/Mode	Bytes Xmit Retries
----------------------------------------------------------
1	5	temp.txt	Client/Put	12752	1
2	6	tmp	Server/Get	423	0
3	7	text.txt	Server/Put	8481	0

Select the ID of the	TFTP Session to display or <RET> to cancel? 2
TFTP Session ID:	6
Type:	Server
Mode:	Get
Local Address:	190.5.6.8	(UDP Port: 5001)
Local File:	c:\tmp
Remote Address:	190.5.6.11 (UDP Port: 5011)
Remote File:	N/A
Transfer Mode:	netascii
Bytes Transferred:	935
Bytes Remaining:	1145723
Total Retries:	0

tftp stats

Displays the current TFTP related statistics. Refer to TFTP Statistics, for a list of available statistics and their definitions.

TRACE COMMANDS

Note: For an explanation regarding the output resulting from the family of trace commands, refer to the Trace Messages chapter.

The following commands are used to enable and disable trace reporting information:

622 CyberSWITCH