Enterasys Networks CSX5500, CSX6000, CSX7000 manual Viewing Throughput Information

USER’S GUIDE

If there was enough memory for all connections, the connection table would reflect both potential and actual connections as the same number.

wan stats

Displays the current system WAN connection statistics. Refer to WAN Statistics, for a list of available statistics and their definitions.

From the “Connection Monitor” screen you can press:

<Arrow Keys>

To select a site that is currently connected.

<Enter>

To view throughput monitoring for the selected site. Refer to the section titled Viewing Throughput Information, for details.

<Esc>

To exit the Connection Monitor screen.

VIEWING THROUGHPUT INFORMATION

The Throughput Monitor screen displays the system throughput monitoring feature in action. To enter this screen:

1.Issue the mc command to display the connection monitor screen.

2.Use the <arrow keys> to move the cursor down to the specific site for which you would like to view throughput information.

3.Press <enter> to display the throughput monitor screen for that site.

Throughput monitoring information can be very useful for fine-tuning your bandwidth configuration parameters. Note that this feature is not available through a Telnet session. Refer to the Configuring Call Control chapter for a complete description of throughput parameters.

The actual bandwidth utilization, along with the current underload setting, is displayed for each throughput sample. After 32 samples are displayed, the newest sample is displayed at position 32 and all other samples are shifted left one position.

582 CyberSWITCH