USER’S GUIDE

LAN Adapter Reset

This is an initialization message. The Ethernet adapter has been reset as part of the adapter initialization sequence.

LAN Adapter Response Timeout

The system expected a command response from the adapter that it did not receive. Check for proper hardware installation.

LAN Adapter ROM version #### #### .### #### # .# ##### ##

The ROM version in the Ethernet adapter is indicated.

LAN Adapter software version conflict

When software is downloaded onto the Ethernet adapter, its software version is compared to the version of software running on the host’s main processor. If the versions do not match, this message is posted. The upgrade did not work properly; contact your Distributor or Customer Support.

LAN Adapter System resource error

LAN Adapter hardware failure detected. If the problem persists, replace your LAN adapter.

LAN Init Error

LAN connection failure. Initialization failure detected by the LAN packet forwarding component in the system.

LAN Port <port #> detected a transceiver problem

The system detected a LAN connection problem on the indicated port. Check for proper LAN connection installation.

LAN Port <port #> detected jabber condition <n> times(s)

A “jabber” condition or an Ethernet frame larger than the maximum legal length has been received. This message is usually displayed if there is a malfunctioning transceiver or a malfunctioning Ethernet device on the LAN. This message is not displayed for every error condition. It appears after 24 hours since the last message was displayed. This message provides the LAN port # in question, and the number of times <n> the jabber condition has been detected.

LAN Port <port #> detected open LAN media

The system detected a problem with the physical LAN on the indicated port. The LAN is not properly terminated or the LAN is not fully connected to the system. Check for proper LAN installation.

LAN Port <port #> detected shorted LAN media

The system detected a problem with the physical LAN on the indicated port. The LAN is not properly terminated or the LAN is not fully connected to the system. Check for proper LAN installation.

LAN Port <port #> is now in the Forwarding state

The bridge LAN port indicated has entered the forwarding state and is now ready for data transfer.

LAN Port <port #> is now in the Learning state

The bridge LAN port indicated has entered the specified state.

516 CyberSWITCH

Page 516
Image 516
Enterasys Networks CSX5500, CSX6000 LAN Adapter Reset, LAN Adapter Response Timeout, LAN Adapter software version conflict