Enterasys Networks CSX6000, CSX5500 DHCP-P Proxy Client disabled, DHCP-P Proxy Client enabled

USER’S GUIDE

[DHCP-P] Ignoring offers from DHCP server x.x.x.x; the server MUST be on a primary LAN interface, or IP addresses will not be obtained

In order for the DHCP proxy client to successfully obtain IP addresses for multiple interfaces, the DHCP server must reside on a primary LAN interface. If it does not, this message is written to the Report Log, and no IP addresses will be obtained from the server and placed into the IP Address Pool. To correct, use CFGEDIT to change the DHCP server’s interface from a secondary interface into a primary interface for that LAN port.

[DHCP-P] Invalid DHCP Server LAN port encountered in configuration; NIF entry not activated

This message appears when the DHCP Proxy Client encounters an invalid configuration setting for an IP network interface’s LAN port on which the DHCP server is to be reached. This will result in no IP addresses being obtained for the network interface in question. Contact your Distributor or Customer Support.

[DHCP-P] Proxy Client disabled

This message indicates that the DHCP Proxy Client has been successfully disabled. This message will appear after the DHCP Proxy Client has been disabled from Manage Mode.

[DHCP-P] Proxy Client enabled

This message will appear whenever the DHCP Proxy Client has been successfully enabled. This could be during system initialization (if configuration values have enabled it), or after the DHCP Proxy Client has been enabled from Manage Mode.

[DHCP-P] Proxy Client initialization failed

This message indicates that the DHCP Proxy Client did not initialize successfully. The DHCP Proxy Client will not be operational. Contact your Distributor or Customer Support.

[DHCP-P] UDP port (67) closed

The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPS UDP port (port 67). If the DHCP Relay Agent is enabled, the BOOTPS port must remain open. If this is the case, the DHCP Proxy Client will not close the UDP port.

[DHCP-P] UDP port (67) opened

The DHCP Proxy Client is being enabled and it must open the BOOTPS UDP port (port 67). This may occur during system initialization, or after the DHCP Proxy Client has been enabled from Manage Mode. If the DHCP Relay Agent is also enabled, it may not be necessary for the Proxy Client to open this UDP port.

[DHCP-P] UDP port (68) closed

The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPC UDP port (port 68).

[DHCP-P] UDP port (68) opened

The DHCP Proxy Client is being enabled and it must open the BOOTPC UDP port (port 68). This may occur during system initialization, or after the DHCP Proxy Client has been enabled from Manage Mode.

[DHCP-R] Failed to allocate memory for transmit buffer pool

The system was unable to allocate memory for the DHCP Relay Agent’s transmit buffer pool during initialization. The Relay Agent will not become operational. Contact your Distributor or Customer Support.

496 CyberSWITCH