Enterasys Networks CSX7000, CSX5500, CSX6000 manual Semiperm

USER’S GUIDE

6.Determine if the CyberSWITCH should always retry a call. If yes, then configuration for the device is done, the device is entered into the semipermanent device list, and appears as shown below. If no, continue to step 7.

Semipermanent Connections Menu:
id	Device	Name	Max Retries Over Interval	Session Interval
-------------------------------			------------- --------------- ------------------
1	"Mike Mason"		(ALWAYS CALL BACK)
(1)	Add, (2)	Change, (3) Delete	a Semipermanent Connection
or <RET> for		previous menu:

7.Enter the maximum number of times to retry a call.

8.Enter the time interval during which the CyberSWITCH keeps track of disconnects.

9.Determine if the CyberSWITCH should attempt to retry a call after a rejection. If yes, continue to step 10. If no, then configuration for the device is done, the device is entered into the semipermanent device list, and appears as shown below.

Semipermanent Connections Menu:
id	Device	Name	Max Retries	Over Interval	Session Interval
-------------------------------			------------- --------------- ------------------
1	"Mike Mason"		10	10 Mins	N/A
(1)	Add, (2)	Change, (3) Delete	a Semipermanent Connection
or <RET> for		previous menu:

10.Enter the time interval before a call is retried. The device is entered into the semipermanent device list, and appears as shown below.

Semipermanent Connections Menu:
id	Device	Name	Max Retries	Over Interval	Session Interval
-------------------------------			------------- --------------- ------------------
1	"Mike Mason"		10	10 Mins	60 Mins
(1)	Add, (2)	Change, (3) Delete	a Semipermanent Connection
or <RET> for		previous menu:

USING MANAGE MODE COMMANDS

semiperm

Displays the semipermanent connection menu. The configuration screens are identical to those displayed by CFGEDIT. Refer to the above section for instructions.

semiperm [add] [change] [delete]

Adds, changes, or deletes a semipermanent connection from the current configuration.

380 CyberSWITCH