Enterasys Networks CSX6000, CSX5500, CSX7000 manual Auth Tacacs Login rejected user user name

SYSTEM MESSAGES

System Message Summary

[AUTH] TACACS LOGIN rejected user: <user name>

The remote Authentication server rejected the named user. This indicates that one of the following has occurred:

1.The <user name> is not in the remote Authentication server’s database.

2.The <user name> is entered incorrectly in the remote Authentication server’s database.

[AUTH] TACACS No server configured for designated database location.

TACACS is configured as a database location for security authentication. Either no TACACS server has been configured or an error occurred when parsing the TACACS server configuration.

[AUTH] Warning code: 0001 Timeout

The configured authentication server(s) did not respond to requests for user authentication. Either the authentication server is not up and running, or it cannot access the IP address.

[AUTH] Warning code: 0002 Missing required attribute from server

The response message from the authentication server did not provide all required attributes for user authentication. The attributes required vary, depending on type of service, and type of security. Refer to the RADIUS Authentication Server User’s Guide for details. Then check user entry for all required attributes.

[AUTH] Warning code: 0003 No UDP buffer available

Internal resources were not available to send/receive an authentication message. Contact your Distributor or Customer Support.

[AUTH] Warning code: 0004 No authentication node available

Internal resources were not available to initiate an authentication session. Contact your Distributor or Customer Support.

[AUTH] Warning code: 0005 No host configured for server IP address

The System does not have a network route to the configured authentication server(s). Verify that a static route has been set up. Then, check your configuration for the correct addresses on interfaces and authentication server.

[AUTH] Warning code: 0006 UDP system failed

Internal resources were not available to initiate an authentication session. Contact your Distributor or Customer Support.

[AUTH] Warning code: 0007 Authentication mode mismatch

An internal request for authentication server access request occurred, but the System is configured in the on-node device table mode. Contact your Distributor or Customer Support.

[AUTH] Warning code: 0008 Authentication agent not initialized

The System could not obtain enough internal resources for the user authentication operation. Contact your Distributor or Customer Support.

[AUTH] Warning code: 0009 Server failed message digest test

A message received from the authentication server did not have the correct authenticator field value.

Central Site Remote Access Switch 487