Enterasys Networks CSX5500, CSX6000, CSX7000 manual Return to the Off-node Server Information Menu

CONFIGURING OFF-NODE SERVER INFORMATION

RADIUS Server

RADIUS ACCOUNTING Menu:
	Primary (Master) Server
	IP Address	is 010.000.000.108
	Shared Secret	is “ralph”
	UDP Port Number	is 1813
	Secondary (Slave) Server
		is Not Configured
	Access Request Retry
	Number of Access Retries	is 3
	Time between Retries	is 1 second
RADIUS Accounting Server Options:
1)	Primary (Master) Server
2)	Secondary (Slave) Server
3)	Miscellaneous Information

Select function from above or <RET> for previous menu:

4.Select (1) Primary Server to enter the following information:

a.IP address of the Accounting Server

b.shared secret between the CyberSWITCH and Accounting Server

c.UDP port number used by the Accounting Server

5.Optional: configure a secondary RADIUS Accounting Server. In the event that the primary server does not respond to system requests, the secondary server will be used for accounting information. The address of the Secondary RADIUS Server must not be the same as the Primary RADIUS Server.

6.Select Miscellaneous Information. Specify the number of retries that the system will use with the Accounting Server, as well as the time between retries.

7.Return to the Off-node Server Information Menu.

8.Select Misc Off-node Server Options. A screen similar to the following will display current settings:

Misc Off-node Server		Options Menu:
			Current Settings
1)	Radius Accounting (Enable/Disable)		Enabled
2)	Radius Type (RFC2138/Cabletron)		RFC2138 compliant
3)	Dynamic Device	Option (Enable/Disable) Enabled
4)	Dynamic Device	Default Settings
Select function from		above or <RET> for previous menu:

9.Verify that RADIUS Accounting is enabled. If enabled, press <RET> to exit the menu. If disabled, select the RADIUS Accounting function to enable the feature. (This selection is a simple toggle switch).

USING MANAGE MODE COMMANDS

offnode

Allows you to change current settings for off-node server options. You may use this command to enable the RADIUS Accounting feature.

Central Site Remote Access Switch 213