Enterasys Networks CSX5500, CSX6000, CSX7000 manual Inserting the Adapters Into the Cyberswitch

HARDWARE INSTALLATION

Inserting the Adapters into the CyberSWITCH

INSERTING THE ADAPTERS INTO THE CYBERSWITCH

Now that you’ve selected the slots and set all switches and jumpers, insert the cards in this way:

1.Remove any existing board hold-down bars/brackets to obtain clear access to the backplane ISA bus connectors.

2.Remove the adapter hold-down screw located on the bracket of the appropriate slot, and remove the bracket. This screw will be needed later to secure the adapter once in place.

3.Holding the adapter by the edges only, slide the adapter into the appropriate slot. Use the adapter guide to align the adapter into place.

4.Once the adapter's gold contacts are lined up with the slots they fit into, use your thumbs to apply pressure to the outer edge of the adapter to gently push the contacts into place.

5.Reinsert the adapter hold-down screw.

Central Site Remote Access Switch 93