Philips SC-BT735 Reprogramming the remote control, Inserting or removing a media, Press OK

STEP 6: Reprogramming the remote control

When other Panasonic products respond to this remote control

Change “Remote Control” (> 40) on the main unit and the remote control (the two must match) if you place other Panasonic products close together and it responds to this remote control.

To change the code on the main unit.

1 While stopped, press [START].

2 Press [3, 4] to select “To Others” and press [OK].

3 Press [3, 4] to select “Setup” and press [OK].

4 Press [3, 4] to select “General” and press [OK].

5 Press [3, 4] to select “Remote Control” and press [OK].

6 Press [3, 4] to select the code (1 or 2) and press [OK].

To change the code on the remote control.

1 While pressing [OK]

Press and hold the numbered button (1 or 2), which has the same number you selected in the step 6 for more than 5 seconds.

2 Press [OK].

Inserting or removing a media

SD CARD SETUP MIC

≥When inserting a media, ensure that it is facing the right way up.

≥While the reading indicator is displayed, do not turn off the unit or remove the media. Such action may result in loss of the media’s contents.

≥When removing the SD card, press on the centre of the card and pull it straight out.

≥If you connect a Panasonic product with a USB connection cable, setup screen may be displayed on connected equipment. For details, refer to the instructions for the connected equipment.

∫To switch sources

Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or “USB”.

≥If a media is inserted while the unit is stopped, the source switches automatically depending on the inserted media.

VQT2Q52

22