Network Easy Setting (Connection Test)
Network Easy Setting (Connection Test)
Complete. |
| |
1. | LAN cable connection | : Fail |
2. | IP address setting | : Fail |
3. | Connection to gateway | : Fail |
|
| |
LAN cable is not connected. |
| |
Please check the connection. |
| |
Select “Yes” and press [OK] to check network | ||
connection again. |
| |
Select “No” and press [OK] to finish Network | ||
Easy Setting. |
| |
Yes | No |
OK |
|
|
| Display |
| Check the | ||
|
|
|
| following | ||
|
|
|
|
| ||
1. | LAN cable connection or | :Fail | ≥ Connection of | |||
Connection to access point |
| the LAN | ||||
2. | IP address setting | :Fail | cables | |||
(> 18) | ||||||
3. | Connection to gateway | :Fail | ||||
|
| |||||
|
|
|
|
|
| |
1. | LAN cable connection or | :Pass | ≥ Connection | |||
Connection to access point | and settings | |||||
| ||||||
2. | IP address setting | :Fail | of the hub | |||
and router | ||||||
|
|
|
| |||
3. | Connection to gateway | :Fail | ≥ Settings of | |||
|
|
|
| “IP Address / | ||
1. | LAN cable connection or | :Pass | ||||
DNS | ||||||
Connection to access point | ||||||
| Settings” | |||||
|
|
| :Home | |||
2. | IP address setting | (> 40) | ||||
network |
|
| ||||
|
|
| available |
|
| |
3. | Connection to gateway | :Fail |
|
| ||
|
|
|
|
|
| |
1. | LAN cable connection or | :Pass |
|
| ||
Connection to access point |
|
| ||||
|
|
| ||||
2. | IP address setting | :Pass |
|
| ||
3. | Connection to gateway | :Fail |
|
| ||
|
|
|
| |||
Network Easy Setting (Internet Connection Test) | ||||||
| Network Easy Setting (Internet Connection Test) |
|
| |||
|
|
|
|
|
| |
|
| Complete. |
|
|
| |
|
| - Connection to the Internet | : Fail(B019) |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
| Failed the connection test. |
|
|
| |
|
| Cannot find the server.(B019) |
|
|
| |
|
| Please refer to the operating instructions for the cause |
|
| ||
|
| of the error and the solution for it. |
|
| ||
|
| Press [OK]. |
|
|
| |
|
| OK |
|
|
| |
Display | Check the following |
Cannot find the server. ≥ “Primary DNS” and “Secondary | |
(B019) | DNS” settings of “IP Address / |
| DNS Settings” (> 40) |
|
|
Failed to connect to | ≥ The server may be busy or the |
the server. | service may have been |
(B020) | suspended. Please wait a few |
| moments, and then try again. |
≥Settings of “Proxy Server Settings” (> 40) and the router
≥Refer to the operating instructions of the hub or router.
≥You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu. (> 40)
≥You can redo these settings individually using “Network Settings”. (> 40)
≥Do not connect to a wireless network for which you do not have usage rights. Wireless networks for which you do not have usage rights (SSID*2) may appear during the automatic search for a wireless network environment. However, if you connect, there is a risk that it will be regarded as illegal access.
≥After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router (Access point) might change. When you have trouble getting online on your PC, perform the network settings of your PC in accordance with the settings of Wireless router (Access point).
*2 This is a name given to identify specific networks among wireless LANs. | started |
When the SSID is the same in two devices, data can be transmitted | Getting |
between them. | |
|
Firmware updating
Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following screen is displayed.
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/
YesNo
OK
RETURN
If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a
http://panasonic.jp/support/global/cs/ (This site is in English only.)
To show the firmware version on this unit. (> 40, “System Information”)
DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.
The firmware has been updated.
Current Installed Version: x.xx
OK
RETURN
≥You can perform update anytime by selecting “Firmware Update” in the Setup menu. (> 40)
≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.
≥If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. (> 40)
VQT2Q52
21
