Philips SC-BT735 Speaker assembly option, Preventing the speakers from falling,   

Models: SC-BT735

1 52
Download 52 pages 20.52 Kb
Page 13
Image 13
Speaker assembly option

 

Use of the speaker cable stickers is convenient

 

Connecting the speaker cables. Insert the wire fully,

 

4

3

when making cable connections.

taking care not to insert beyond the wire insulation.

 

 

 

e.g. Front speaker (L)

 

e.g. Surround speaker [BT230]

started

FRONT

Lch

ASpeaker cable sticker (included)

B Connector

Speaker cable sticker

Colour

1

FRONT (L)

WHITE

 

 

 

2

FRONT (R)

RED

 

 

 

3

SURROUND (L)

BLUE

 

 

 

4

SURROUND (R)

GREY

 

 

 

5

CENTRE

GREEN

 

 

 

6

SUBWOOFER

PURPLE

 

 

 

Be sure to match the number on each sticker with the connector colour.

r: White

s: Blue line

Push!

Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.

Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before connecting the appropriate cable.

To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.

Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.

Getting

Speaker assembly option

[BT330]

Thread the speaker cable

Attach the speaker.

 

through the base.

Insert the wire fully.

 

Leave about 120 mm

r: White

Push!

 

s: Blue line

 

∫Preventing the speakers from fallingManual background Press into the groove.

Tighten securely.

Slide into the

You can remove and use the cable fromManual backgroundManual background groove. the stand. To reattach the cable, refer to

page 42.

[BT735] [BT330]

Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.

e.g., [BT735]

AString (not included)

Thread from the wall to the speaker and tie tightly.

BRear of the speaker

CScrew eye (not included) D Wall

E Approx.150 mm

VQT2Q52

13

Page 13
Image 13
Philips SC-BT735 operating instructions Speaker assembly option, Preventing the speakers from falling,   