Enterasys Networks CSX7000, CSX5500, CSX6000 manual IPX Netware Static Services

CONFIGURING IPX

IPX NetWare Static Services

IPX NETWARE STATIC SERVICES

Note: With the availability of Triggered RIP/SAP (page 343), the configuration of static services is no longer necessary but still supported. Situations may arise in which a remote router does not support our implementation of Triggered RIP/SAP. In this case, it would be necessary to configure a static service for that particular router.

CONFIGURING IPX NETWARE STATIC SERVICES

USING CFGEDIT

1.Press 6 from the IPX menu to configure a NetWare static service entry.

2.Press 1 to begin the configuration of a NetWare static service entry.

3.Enter the user-defined service name.

4.Enter the hexadecimal service type.

5.Enter the hexadecimal IPX network number for this service.

6.Enter the hexadecimal IPX node number for this service.

7.Enter the hexadecimal IPX socket number for this service.

8.Enter the number of hops to this service.

9.Select the SAP propagation control. Note that the third option (propagate only when the Next Hop is connected) is displayed only when the static route Next Hop is accessed over the WAN.

10.After all NetWare static service information has been entered, a screen similar to the following sample screen will be displayed:

Service	Name	Admin
Service	Type	0x0004 File Server
Network	Address	33333333:0409a0000001:0451
Number of Hops		2
SAP Propagation		Propagate only when the Next Hop is connected
Are you	sure you want to add the STATIC Service (Y or N) [Y]? <RET>

11. Press "Y" to save the static service configuration.

USING MANAGE MODE COMMANDS

ipxsvc

Displays the current IPX service data (both statically entered and "learned").

ipxsvc [add/change/delete]

Allows you to add/change/delete an IPX service.

Central Site Remote Access Switch 335