Enterasys Networks CSX6000, CSX5500, CSX7000 manual Call Restriction Configuration Elements

CONFIGURING CALL CONTROL

Call Restrictions

USING MANAGE MODE COMMANDS

alarm

Displays the current status of the audible alarm. It is displayed as either enabled or disabled. If enabled, the audible alarm will sound when a call restriction condition has been met.

alarm off

Disables the audible alarm that sounds when a call restriction condition has been met.

alarm on

Enables the audible alarm that sounds when a Call Restriction condition has been met.

callrest

Displays the current Call Restriction configuration data.

callrest off

Disables the Call Restriction feature.

callrest on

Enables the Call Restriction feature.

CALL RESTRICTION CONFIGURATION ELEMENTS

STATUS

Allows you to enable or disable the call restriction option.

HOURS CALLS ARE ALLOWED

The allowable hours for outbound calls (inbound calls will always be allowed). Separate each hour by a comma. Ranges are allowed by inserting a dash (-) between the first and last hours in the range. A zero entered by itself will allow no calls during any hour.

Two actions are available if an outbound call is attempted at any other time:

1.The call will not be allowed; a message will be displayed on the LCD, and written to the report log.

2.The call will be allowed; however, a warning will be displayed on the LCD and written to the report log.

The following chart provides the numbers you should use to represent the am and pm hours of the hours calls are allowed:

From:	12:00	1:00	2:00	3:00	4:00	5:00	6:00	7:00	8:00	9:00	10:00	11:00
To:	12:59	1:59	2:59	3:59	4:59	5:59	6:59	7:59	8:59	9:59	10:59	11:59
am hour	1	2	3	4	5	6	7	8	9	10	11	12
pm hour	13	14	15	16	17	18	19	20	21	22	23	24

Central Site Remote Access Switch 373