Enterasys Networks CSX7000, CSX5500, CSX6000 manual System Message Summary

USER’S GUIDE

SYSTEM MESSAGE SUMMARY

The following pages list all the informational, warning and error messages alphabetically. The text describes the messages, and includes suggestions for problem resolution (if applicable). Note that the trace messages have been isolated for your convenience, and are summarized in the next chapter.

<timestamp> # 000: Couldn’t open the file C:\SYSTEM\PLATFORM.NEI The open operation failed, no further detail is available.

<timestamp> # 0000: Error reading C:\SYSTEM\PLATFORM.NEI

The read operation failed, perform a software upgrade to reinstall the file.

<timestamp> # 0000: Error reading platform type: there is no “plat name” field

There is no <platform name> value following the “=” character in the “current setting” string.

<timestamp> # 0000: Error reading platform type: there was no “=” in the string

The “current setting” string has the format “<platform type>=<string>”. This error message indicates that no “=” character exists in the string.

<timestamp> # 0000: Error reading platform type: type value is too large

The <platform type> value in the “current setting” string is too large to represent an actual platform type.

<timestamp> # 0000: Error reading platform type: type was not converted to an int

The <platform type> value in the “current setting” string could not be converted to an actual platform type.

1 port LAN Adapter, operating in remote mode only

This is an initialization message. It identifies the Ethernet adapter type (Ethernet-1), and operating mode. Remote bridging is supported.

2 port LAN Adapter, operating in local and remote mode

This is an initialization message. It identifies the Ethernet adapter type (Ethernet-2), and operating mode. Both local and remote bridging are supported.

aarp found duplicate AppleTalk address <AppleTalk Address> @ <MAC address>

The address resolution protocol found duplicate AppleTalk addresses for this AppleTalk network. Check the configuration for the AppleTalk ports’ network range/number.

Abnormal response rcvd: <state msg reason cc state>

An unexpected message was received from a WAN interface card. The <parameters> included are for problem reporting purposes only. If the system fails to operate normally, or the warning continues to occur, contact your Distributor or Customer Support.

A call has exceeded the configured maximum duration

A call has been up longer than the amount of time configured. The next log message will inform the user whether or not the call has been taken down.

482 CyberSWITCH