Enterasys Networks CSX6000, CSX5500, CSX7000 manual Modem Type, COM1

REMOTE MANAGEMENT

Carbon Copy

Enter the following command to start up the CCINSTAL program:

C:\admin>ccinstal

The Carbon Copy System Parameters screen will appear. Follow the directions on the screen to change parameter settings.

A	Comm Port Address	COM1	Q	Quit, changes not saved
B	Baud Rate	9600	X	eXit, changes saved
C	Modem Type	Direct Connect
D	Keyboard Handling	USA Keyboard
E	Display Type	Default
F	Menu Colors	White on Blue
G	Working Directory	Default Directory
H	Menu Level Option	Advanced
1	CC Optional Configuration Parameters
2	CCHelp Optional Configuration Parameters
3	Call Table
4	Password Table

Type letter for selection:

After you make all parameter changes, select “X” to save the changes and exit the CCINSTAL program. Restart the CyberSWITCH by issuing the command: start_ne.After issuing the start_ne command, you must again login to the system.

CARBON COPY CONFIGURATION PARAMETERS FOR MODEM USAGE

If you wish to manage your CyberSWITCH via a modem, you will need to make changes to the Carbon Copy configuration parameters. To make these configuration changes, you must have previously installed your internal or external modem. You will also need a locally attached keyboard and monitor.

To change Carbon Copy parameters on the CyberSWITCH, terminate the CyberSWITCH by typing quit. Next, enter the following command at the MSDOS prompt to change the current directory to “ADMIN”:

C:\>cd \admin

Enter the following command to start up the CCINSTAL program:

C:\admin>ccinstal

The Carbon Copy System Parameters screen will appear. Refer to the above section titled Changing CARBON COPY Configuration Parameters for a sample screen. Follow the directions on the screen to change parameter settings. The parameters that you may need to change are as follows:

Modem Type

You must change the modem type from the default of “Direct Connect” to your modem’s brand name. To make this change, enter a menu selection of “C” (for Modem Type). A list of modem types will be displayed. Arrow down to the type of modem you have installed. If the type of modem you have installed is not included on the list, select Hayes Smartmodem.

You will then be asked if you want to use the Modem’s default baud rate. Answer either yes or no by entering Y or N.

Central Site Remote Access Switch 571