CDA WF140 manual Failure Codes and Troubleshooting, Error code Advice

Failure Codes and Troubleshooting

The programme indicators also serve as a diagnostic display to help in the event of a problem with the appliance.

		Error code				Error
							Advice
Wash	Rinse		Dry	End	Start/	description
					Pause
							Make sure the water inlet tap is fully
							open. Close the water tap, separate
						Inadequate	the water inlet hose from the tap and
						water supply	clean the filter. Restart your machine
							and contact CDA service if the error
							continues.
						Continual fill	Close the tap and contact
							CDA service.
						error
						The waste	Drain hose is blocked.
							The filters of your machine might
						water in the	be blocked.
						machine cannot	Restart the dishwasher and cancel
						be discharged.	the programme. If the error
							continues contact CDA service.
						Heater error	Contact CDA service.
						Alarm is active	Turn off the dishwasher and
						against water	disconnect from the water supply.
						overflow	Contact CDA service.
						Faulty	Contact CDA service.
						electronic card
						Overheating
						error
						(temperature in	Contact CDA service.
						the machine is
						too high.)

Faulty heater

sensor

Contact CDA service.

11