Connections |
English |
IMPORTANT!
–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
–Never make or change any connections with the power switched on.
–The type plate is located at the rear or bottom of the system.
Connecting antennas
MW Indoor Loop Antenna
Connect the supplied MW loop antenna to the MW jack. Position the loop antenna to receive the clearest sound.
Fix the claw to the slot
MW
FM Indoor Antenna
Connect the supplied FM antenna to the FM jack. Move the antenna in various directions until the clearest signal is received.
Note:
–Keep the antenna as far away as possible from the TV,VCR or any radiation source to prevent unwanted noise.
FM Outdoor Antenna
For better FM reception, use a 75 ohm coaxial cable (not supplied) to connect the system to an outdoor FM antenna as shown.
AM
FM (75 Ω)
CONNECTIONS 9
pg | 9 | 4/23/02, 8:59 AM |
