Enterasys Networks CSX5500, CSX6000, CSX7000 manual Digital Modem Inactivity Timeout

CONFIGURING CALL CONTROL

Digital Modem Inactivity Timeout

DIGITAL MODEM INACTIVITY TIMEOUT

This feature allows the CyberSWITCH to disconnect inactive modem connections based on lack of activity for a specified amount of time. This feature does not affect digital HDLC connections.

CONFIGURING THE DIGITAL MODEM INACTIVITY TIMEOUT

USING CFGEDIT

1.From CFGEDIT’s Options Menu, select Call Control Options.

2.Select Digital Modem Inactivity Timeout. A screen similar to the following will display:

The Modem Inactivity Timeout is currently DISABLED.

Do you wish to change the Current Modem Inactivity Timeout Configura- tion (Y or N) [default = N]: ? Y

Do you wish to ENABLE the Modem Inactivity Timeout (Y or N) [default = N]: ? Y

Modem Inactivity Timeout (1 - 42 minutes) [default = DISABLED]: ?

30

3.Respond to the menu prompts to change the current configuration, and then enable the Modem Inactivity Timeout feature.

4.Specify, in minutes, the amount of time the CyberSWITCH should wait to terminate connections to inactive digital modem devices.

5.To activate the new Modem Inactivity Timeout value, you must save CFGEDIT changes, and restart the CyberSWITCH.

USING MANAGE MODE COMMANDS

modinact

Displays the current Modem Inactivity Timeout value.

modinact [change]

Allows you to change the Modem Inactivity Timeout configuration as if you were in the CFGEDIT screen.

Note: If this feature is changed using Manage Mode, the changes will not affect any calls currently up or in progress. It will only affect subsequent calls.

MODEM INACTIVITY TIMEOUT CONFIGURATION ELEMENTS

MODEM INACTIVITY TIMEOUT VALUE

The amount of time, in minutes, the CyberSWITCH should wait before terminating connections to digital modem devices based on a lack of data transfer. You may specify a value between 1 and 42 minutes. The default value is 0 (feature disabled).

Central Site Remote Access Switch 387