Enterasys Networks CSX5500, CSX6000, CSX7000 manual Administrative Session Configuration Elements

USER’S GUIDE

4.You may specify an authentication database location for administrative sessions that is different from the user authentication database location.

Note: If you select RADIUS, TACACS, or ACE, you must be sure that the selected server is active before you initiate an administrative session.

5.From the Administrative Session menu select (2) Session Inactivity Timeout. The following prompt is displayed:

Enter the Session Inactivity Timeout value in minutes.

Use "0" to disable the Session Inactivity Timeout [default = disabled]?

6.Follow the onscreen instructions to set the session inactivity timeout session.

7.From the Administrative Session menu, select (3) Number of Admin Telnet Sessions. The following prompt is displayed:

Enter the number of Telnet allowed for administrative sessions.

Use "0" to disable the Telnet Server [default = 3]? 1

8.Follow the onscreen instructions to configure the number of administrative Telnet sessions you wish to allow. Up to three sessions are possible.

Note: To have any Telnet sessions, you must first enable IP.

9.To change the value of the port number, select (4) Telnet Server TCP Port Number from the from the Administrative Session menu.

10.Follow the onscreen instructions for entering the port number.

11.Select option (5) Emergency Telnet Server Port Number from the Administrative Session menu.

12.Follow the onscreen prompts to configure the port number.

USING MANAGE MODE

admlogin

Displays the current administration session configuration.

admlogin change

Displays the Administration Session Configuration Menu screen, allowing you to change the authentication database location. Refer to Using CFGEDIT for configuration instructions.

ADMINISTRATIVE SESSION CONFIGURATION ELEMENTS

DATABASE LOCATION

The authentication database location for administration sessions. This database location may be different from the user authentication database. The default database location is the on-node device database.

180 CyberSWITCH