Enterasys Networks CSX6000, CSX5500, CSX7000 manual Throughput Monitor Contents

SYSTEM COMMANDS

Viewing Throughput Information

Throughput Monitor
	#1	#2
Wide Area Network Bandwidth Utilization to site	sitename	@ current bandwidth Kbps
= UNDERLOAD BANDWIDTH	= ACTUAL BANDWIDTH UTILIZATION
100

% of current
bandwidth			30
			0
				8	16				24	32
							Samples
						Throughput Parameters
		Sample Rate (seconds):						03
			Overload:	Trigger	01			Window	02		Utilization (%) 10
			Underload:	Trigger	05			Window	10
			Idle:	Trigger	05			Window	05		Utilization (%) 10
	< Press		F to Freeze data capture,					Esc to return to Connection Monitor >

Note: If data compression is being used, an extra line will be displayed on the Connection Monitor screen that will provide the compression and decompression ratios, and the estimated throughput. The estimated throughput is calculated as follows:

est. thruput (in Kbits/second) = [(uncmp bits + undmp bits)/sample period)]/1000

Where uncmp bits = the number of uncompressed bits undmp bits = the number of undecompressed bits sample period = configured length of the sample period

THROUGHPUT MONITOR CONTENTS

#1. Indicates the site name for the connected site that was selected on the Connection Monitor screen.

#2. Indicates the current bandwidth in place to the connected site. This number will be updated as calls are added or released.

#3. Example of three samples where actual bandwidth utilization was around 95% and underload was not being monitored (probably because only one connection was in place). In this example, overload is occurring on all three samples.

Central Site Remote Access Switch 583