Enterasys Networks CSX5500, CSX6000, CSX7000 manual Bridge Commands, Zone

SYSTEM COMMANDS

Bridge Commands

atalk stats rtmp

Displays the AppleTalk Routing Table Maintenance Protocol (RTMP) statistics.

atalk stats zip

Displays the AppleTalk Zone Information Protocol (ZIP) statistics.

atalk stats nbp

Displays the AppleTalk Name Binding Protocol (NBP) statistics.

atalk stats atp

Displays the AppleTalk Transaction Protocol (ATP) statistics.

atalk zone

This command will display AppleTalk zone information. A sample output screen is shown below:

zone	network range
------------------	-------------
zone1	225	-	226
zone2	236	-	237

The fields in this display are defined as follows:

zone

The AppleTalk zone name for the network that the AppleTalk port is connected to.

network range

Specifies the network range associated with the indicated zone.

BRIDGE COMMANDS

The following commands are used to display bridging information and statistics.

pkt mac

Enables the MAC address monitor display. The MAC Address Monitor screen displays information contained in the LAN frames that are sent over the ISDN connections. The packets represented by the displayed MAC address pairs will not be captured unless the br pkt capture feature is on (enabled).

When the MAC Address monitor is enabled, the CyberSWITCH inspects each LAN frame sent or received over the ISDN connections. It displays the Destination MAC Address, Source MAC Address, and Ethernet type field for each LAN frame.

Central Site Remote Access Switch 591