Command Reference
The capacity of a library media class is a soft limit. If the capacity of a library media class is exceeded, the entire vsreclassify request is processed unless the capacity of the associated MediaClass group is reached. When the capacity of the library media class is reached, applicable High Mark processing is initiated.
An attempt to reclassify media into its current MediaClass group fails.
If reclassifying media places it in a MediaClass group that does not have the media’s present location as a preferred location, the media is NOT moved just to place it into a preferred area. Later, if the media is mounted then dismounted, or ejected then entered, an attempt is made to place the media in a preferred location as defined by the target library media class.
If media to be reclassified is in a library, the target MediaClass group must be associated with that library.
Media that does not reside in a library can be reclassified.
The vsreclassify command triggers unsolicited status messages from VolServ.
See Also | • | vsmount |
| • | vsmedclassqry |
Commands
601356 Rev A | Command Reference |
|
