ADIC 601356 manual Commands, Parameter, Description, H hostname, P priority, R retries, T timeout

		Command Reference
	Parameter	Description
	-h	Requests help for the entered command.
		When the Help option is specified, no
		command line processing is performed.
		An exit code of 0 is returned to the client
		when the Help option is specified.
	-Hhostname	Host name of the VolServ server.
		The default host name is the host name of
		the computer where the CLI command is
		run.
	-Ppriority	The execution priority of the entered
	Default value is 15.	command. Assignable priority values are
		restricted to a range from 1 (highest) to 32
		(lowest) inclusive.
	-Rretries	Number of retries the CLI software
	Default value is 3.	attempts if a time-out is returned by the
		API software.
	-Ttimeout	Amount of time (in seconds) the API
	Default value is 120	software waits for status from VolServ
		before returning a time-out to the CLI
	seconds.
		software. Total wait time for a command is
		(retries plus 1) multiplied by time-out value.
	-Vprognum	RPC program number for VolServ.
	Default value is
	300016.
Return Codes	• 0 - The vsreclassify command is successfully
	processed.

• -1 - An error is detected by either the CLI software or the API software.

• >0 - An error is detected by VolServ. The returned exit code corresponds to the error code given by VolServ.

Commands

601356 Rev A Command Reference 2-139