ADIC 601356 manual Conventions, Bold font

Command Reference

Conventions	The conventions used throughout the VolServ technical books
	are listed below:
Convention		Example
Screen text, file names, program names, and		Request to add a new volume:
commands are in Courier font.		Volume group will be “20”
		Volume position will be “A123”.
The root prompt is shown as a number		# su root
symbol.
What you should type in is shown in Courier		vsarchiveqry
bold font.
Site-specific variables are in a Times italics		tar -xvftapedevicename
font.
A backward slash ( \ ) denotes the input is		# remsh nodename -n dd if=/dev \
continued onto the next line; the printed page		/tapedevicename/bs=20b tar xvfb \
is just not wide enough to accommodate the		- 20
line.
		(You should type the entire command without
		the backward slash.)
Pressing <Return> after each command is
assumed.
A menu name with an arrow refers to a		Config-->MediaType-->Redefine
sequence of menus.

P-4 Preface 601356 Rev A