ADIC 601356 manual Vscleareject request fails for media if the media is

Command Reference

Step 1. Errors with verbose option not specified. Requests VolServ to remove MED012, MED013, MED014, and MED051 from the Eject list and to return status on media only if processing for that media failed.

vscleareject MED012 MED013 MED014 MED051

Step 2. Output returned:

Clear Eject 2 of 4 media was successful

Error VOL024: error in the list

Media	[MED013]	media not marked for ejection
Media	[MED051]	item not found

Notes	The vscleareject request fails for media if the media is
	already selected for eject by the operator.
	Failure of the vscleareject request for one or more media in
	a list does not fail the request for all media in the list.
	An operator also removes media from the Eject list by
	performing an Eject Fail from the appropriate library’s console
	display. The Eject Fail functionality is not available from the
	command line.
	The Clear Eject command triggers unsolicited status messages
	from VolServ.
	A pending Clear Eject request is cancelled with the VolServ
	cancel command. The VolServ cancel command is run from the
	command line by sending a SIGQUIT signal (control-\). The
	request also is aborted by sending the SIGINT signal
	(control-c).
See Also	• vscheckout,

2-38 Command Reference 601356 Rev A