ADIC 601356 manual Mounted drives that have their state changed remain in-use

	Command Reference
Notes	Mounted drives that have their state changed remain in-use.
	Varying a drive has no impact on client data transfer operations
	in progress and the client receives no automatic notification of a
	drive state change.
	Drives can be varied, regardless of whether or not they are
	associated with a library.
	Drives can be varied, regardless of whether or not they are
	allocated; however, allocated drives that are not online cannot
	be dismounted.
	The unavailable state is assignable only by VolServ when a
	higher level component in the library system is no longer
	online. For example, varying a CLM offline causes the
	associated drive to be viewed as unavailable.
	The vsdrivevary command does not trigger unsolicited
	status messages from VolServ.
	A pending vsdrivevary request is cancelled with the VolServ
	cancel command. The VolServ cancel command is run from the
	command line by sending a SIGQUIT signal (control-\). The
	request also is aborted by sending the SIGINT signal
	(control-c).
See Also	• vsdriveqry

Commands

601356 Rev A Command Reference 2-57