Cleaning and care
Descaling the steam injection system
When to run the descaling process
The frequency of descaling will depend on the water hardness level in your area.
The descaling process can be run at any time.
However, to ensure that the oven functions correctly you will be automatically prompted to run the descaling process after a certain number of programmes.
The oven will let you know when only
10 programmes can be run before you have to run the descaling process. The programmes will count down to 0 in the display. You will then not be able to run any function or Automatic programme using moisture.
They cannot be used until descaling has been carried out.
All other functions and Automatic programmes without moisture can still be used.
Sequence of a descaling cycle
Once the descaling process has been started it must be completed through to the end. It cannot be cancelled.
The descaling cycle takes approx. 90 minutes and consists of several steps:
1.Preparation
2.Descaler intake
3.Activation phase
4.Rinse 1
5.Rinse 2
6.Rinse 3
7.Evaporate residual moisture
111
