Moisture plus
Residual water evaporation
When cooking using the addition of moisture, the water will be equally distributed between the number of bursts of steam and used up as long as the programme is not interrupted.
However, if a programme using the addition of moisture is interrupted before all the bursts of steam have been injected, the water for these unused bursts of steam will remain in the system.
The next time Moisture plus or an Automatic programme with moisture is used "Evaporate residual moisture?" will appear in the display with the options "Skip" and "Yes".
It is best to start the evaporation of residual water straight away so that only fresh water is used during a cooking programme.
To start residual water evaporation immediately
Steam can cause scalding injuries. Do not open the door during the evaporation process.
Select the Moisture plus function or an Automatic programme that uses moisture.
"Evaporate residual moisture?" will appear in the display with the option "Yes" highlighted.
Touch the OK sensor.
"Evaporate res. water" and a time will appear in the display.
The evaporation process will begin. The duration will count down in the display.
The duration displayed depends on the amount of water in the system. During the evaporation process, this duration may change depending on how much water is present.
64
