Cleaning and care
Place the container with the descaling solution together with the plastic tube on the floor of the oven.
Attach the other end of the plastic tube to the water intake pipe.
Close the door.
Touch the OK sensor.
The intake process will begin. You can hear the pump while this is happening.
The intake process can be interrupted and restarted at any time by touching OK.
The amount of solution specified can be more than the amount which is actually taken in. Some of the solution may therefore be left in the container at the end of descaling.
A message will appear in the display when the intake process is finished.
Touch the OK sensor.
The activation phase will begin. You can follow the duration as it counts down.
Open the door.
Leave the container with the tube connected to the water intake pipe in the oven. Top the container up with approx. 300 ml of water, as the system will need to draw in some more liquid during the activation phase.
Close the door.
The system will take in more liquid at approximately 5 minute intervals. You will hear the noise of the pump for a moment or so.
At the end of the activation phase a buzzer will sound, if the buzzer is switched on (see "Settings - Buzzer tones").
