Using for the first time
Touch the OK sensor.
The water intake process will begin.
The amount of water actually drawn up into the oven may be less than the amount specified as required, leaving a small amount in the container.
Remove the water container after the water intake process.
Confirm the message telling you that the process is complete by touching the OK sensor.
Close the door.
The message will then disappear.
You will hear the pump briefly as the remaining water in the water intake pipe is drawn into the oven.
The oven heating will switch on.
After a short time a burst of steam is injected automatically.
Danger of injury. Steam can cause injury by scalding. Do not open the appliance door while a burst of steam is being injected.
Heat the empty oven for at least an hour.
After at least an hour:
Switch the oven off.
After heating up for the first time
Danger of burning. Allow the oven interior to cool down before cleaning by hand.
Switch the oven on.
Touch , to switch on the oven interior lighting.
Take all accessories out of the oven and clean them by hand (see "Cleaning and care").
Clean the oven interior with a clean sponge and a solution of hot water and
Dry all surfaces with a soft cloth.
Switch the interior lighting and the oven off.
Leave the oven door open until the oven interior is completely dry.
37
