Problem solving guide
Problem | Possible cause and remedy | |
"Fault: F 33" appears in | The door lock for the Pyrolytic cleaning programme is | |
the display. | not being released. | |
| Switch the oven off and then back on again. | |
| If the door lock still does not release itself call the Miele | |
| Service Department. | |
" Fault: F XX" appears | There is a problem that you cannot resolve. | |
in the display. | Call the Miele Service Department. | |
|
| |
The message "Function | The steam injection system is faulty. | |
not available" appears | Call the Miele Service Department. | |
in the display after |
| |
selecting Moisture |
| |
plus or the |
| |
"Descale" function. |
| |
The message "Fault with | The steam injection system is faulty. | |
moisture control - the | Call the Miele Service Department. | |
automatic programmes | Automatic programmes can be run without using | |
will operate without | ||
moisture. | ||
moisture" appears in the | ||
display after selecting |
| |
an Automatic |
| |
programme. |
| |
Programmes using | Demo mode is active. | |
moisture will not take in | The oven can be used in demo mode but the pump for | |
water. | the steam injection system will not work. | |
| Deactivate demo mode. See "Settings - Showroom | |
| programme". | |
|
|
